Hebei Xushi Weiye Machinery Ma
- Thread Rolling Machines
- > Semi-Automatic threading machine
- > CNC automatic threading machine
- > Pneumatic-Automatic threading machine
- > Electric automatic threading machine
- > Hydraulic thread rolling machine
- Butt Welding Machines
- > Manual butt welding machine
- > pneumatic butt welding machine
- Rebar Cutting Equipment
- > Rebar cutting mahcine
- > Rebar sawing machine
- > Steel bar straightening and cutting machine
- Upsetting Machines
- Rebar bending equipemnt
- Machine Parts
- > Thread Rollers
- > Peeling Blades
- > Rebar Coupler
- > Thread Rolling System
QZD-SKQD50 CNC Pneumatic rebar thread rolling machine
移动的div
CNC system,Driven by servo motor,The screen sets the positive and inverse screw and adjusts the length of the filaments.
Automatic servo pneumatic steel bar straight thread rolling machine, using advanced servo drive and control system, highly automatic, accurate control of the workpiece consistency, fast speed, greatly improve the efficiency, easy to operate and reduce labor intensity. Compared with the traditional manual and pneumatic thread rolling machine, it has the advantages of high precision, high efficiency, few fault points and high reliability.
Power mechanism: head rotation motor,head translation motor, clamping cylinder, water pump, touch screen, foot switch, emergency stop switch, electric control system.
Reducer: self-developed transmission gearbox, low center height, widening transmission wheelbase, thickening transmission shaft.
Head rotating motor: drive the three sets of rollers in the head of the machine to do rotation to strip the ribs and make thread for the steel bar.
Head translation: the servo motor drives the turbine reducer forward and backward.
Clamping: the cylinder drives the rack gear to clamp the steel bar (external air source is required).
Water pump: transport coolant, cooling and lubrication the steel bar when process.
Touchscreen: set parameters such as process length and positive or inverse screw, and the machine can be self-checked and the state can be monitored.
Foot switch: It is the starting switch of the machine under automatic state.
Emergency stop switch: to stop the operation of the machine in an emergency state.
Electrical control system: input three-phase 380V+N (null line). Control 3 power motors.
NAME | CNC Pneumatic re-bar threading machine |
MODEL | QZD-SKQD50 |
MOTOR POWER | 7.5kw |
SPEED RITIO OF REDUCER | 1：17 |
REBAR DIAMETER | Φ16-Φ40mm |
PROCESS LENGTH | 150mm |
HEAD CONFIGURATION | Helix angle |
VOLTAGE | 380V |
STANDARD FREQUENCY | 50hz |
EXTERNAL DIMENSIONS | 1460*770*1100mm |
WEIGHT | 500kg |
BLADE SIZE | 12*25*40mm |
ROLLER | Semicolon |
1. Q: Are you a trading company or manufacturer?
A: We are an original equipment manufacturer.
2. Q: How long is your delivery time?
A: It is according to the model and quantity.
Generally, it is 3-5 days if the products are in stock.
It will be 15-30 days if you want to customize the products
3. Q: What are your terms of payment?
A: We accept T/T, Western Union, etc.
Payment<=USD 5000, 100% in advance.
Payment>=USD 5000, 30% T/T in advance, balance before shipment.
4. Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge, but clients need to pay the cost of freight.
移动的div
CNC system,Driven by servo motor,The screen sets the positive and inverse screw and adjusts the length of the filaments.
Automatic servo pneumatic steel bar straight thread rolling machine, using advanced servo drive and control system, highly automatic, accurate control of the workpiece consistency, fast speed, greatly improve the efficiency, easy to operate and reduce labor intensity. Compared with the traditional manual and pneumatic thread rolling machine, it has the advantages of high precision, high efficiency, few fault points and high reliability.
Power mechanism: head rotation motor,head translation motor, clamping cylinder, water pump, touch screen, foot switch, emergency stop switch, electric control system.
Reducer: self-developed transmission gearbox, low center height, widening transmission wheelbase, thickening transmission shaft.
Head rotating motor: drive the three sets of rollers in the head of the machine to do rotation to strip the ribs and make thread for the steel bar.
Head translation: the servo motor drives the turbine reducer forward and backward.
Clamping: the cylinder drives the rack gear to clamp the steel bar (external air source is required).
Water pump: transport coolant, cooling and lubrication the steel bar when process.
Touchscreen: set parameters such as process length and positive or inverse screw, and the machine can be self-checked and the state can be monitored.
Foot switch: It is the starting switch of the machine under automatic state.
Emergency stop switch: to stop the operation of the machine in an emergency state.
Electrical control system: input three-phase 380V+N (null line). Control 3 power motors.
NAME | CNC Pneumatic re-bar threading machine |
MODEL | QZD-SKQD50 |
MOTOR POWER | 7.5kw |
SPEED RITIO OF REDUCER | 1：17 |
REBAR DIAMETER | Φ16-Φ40mm |
PROCESS LENGTH | 150mm |
HEAD CONFIGURATION | Helix angle |
VOLTAGE | 380V |
STANDARD FREQUENCY | 50hz |
EXTERNAL DIMENSIONS | 1460*770*1100mm |
WEIGHT | 500kg |
BLADE SIZE | 12*25*40mm |
ROLLER | Semicolon |
1. Q: Are you a trading company or manufacturer?
A: We are an original equipment manufacturer.
2. Q: How long is your delivery time?
A: It is according to the model and quantity.
Generally, it is 3-5 days if the products are in stock.
It will be 15-30 days if you want to customize the products
3. Q: What are your terms of payment?
A: We accept T/T, Western Union, etc.
Payment<=USD 5000, 100% in advance.
Payment>=USD 5000, 30% T/T in advance, balance before shipment.
4. Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge, but clients need to pay the cost of freight.
Loading ...
HOME | ABOUT US | PRODUCTS | NEWS | VIDEOS | DOWNLOAD | CONTACT US
ADDRESS:Qiaoxi street, Wuqiang county, Hengshui city, Hebei province, China
Tel:+86-318-3838064 Fax:+86-318-3968585 E-mail：info@xswy-machinery.com
Copyright © Hebei Xushi Weiye Machinery Manufacturing Co., Ltd.
Copyright © Hebei Xushi Weiye Machinery Manufacturing Co., Ltd.
